|
|
|
|
|
Specifications
 |
| |
|
Model |
VP-540 |
VP-300 |
| Printing technology |
Piezoelectric inkjet |
| Media |
Width |
210 to 1,371 mm (8.3 to 54 in.) |
182 to 762 mm (7.2 to 30 in.) |
| Thickness |
Maximum 1.0 mm (39 mil) with liner, for printing
Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without
liner, for cutting |
| Roll outer diameter |
Maximum 180 mm (7 in.) |
| Roll weight |
Maximum 30 kg (66 lb.) |
Maximum 20 kg (44 lb.) |
| Core diameter |
50.8 mm (2 in.) or 76.2 mm (3 in.) |
| Printing/cutting width (*1) |
Maximum 1,346 mm (53 in.) |
Maximum 736 mm (29 in.) |
| Ink cartridges |
Type |
Roland ECO-SOL MAX INK |
| Capacity |
220 cc or 440 cc |
| Color |
Four colors (cyan, magenta, yellow, and black) |
| Printing resolution (dots per inch) |
Maximum 1,440 dpi |
| Cutting speed |
10 to 300 mm/s |
| Blade force |
30 to 300 gf |
| Software resolution (when cutting) |
0.025 mm/step |
| Distance accuracy (when printing)
(*2)(*3) |
Error of less than ±0.3 % of distance traveled, or
±0.3 mm, whichever is greater |
| Distance accuracy (when cutting) (*3) |
Error of less than ±0.4 % of distance traveled, or
±0.3 mm, whichever is greater
When distance correction has been performed (when the setting for
[CALIBRATION] - [CUTTING ADJ.] has been made):
Error of less than ±0.2 % of distance traveled, or ±0.1 mm,
whichever is greater |
| Repeatability (when cutting) (*3) (*4) |
±0.1 mm or less |
| Alignment accuracy for printing and
cutting (*3) (*5) |
±0.5 mm or less |
| Alignment accuracy for printing and
cutting when reloading media (*3) (*6) |
Error of less than ±0.5 % of distance traveled, or
±3 mm, whichever is greater |
| Media heating system (*7) |
Print heater, setting range for the preset
temperature: 30 to 45 °C (86 to 112 °F)
Dryer, setting range for the preset temperature: 30 to 50 °C (86
to 122 °F) |
| Connectivity |
Ethernet (10BASE-T/100BASE-TX, automatic
switching) |
| Power-saving function |
Automatic sleep feature |
| Power requirements |
AC 100 to 120 V ±10 %, 8.3 A, 50/60 Hz or
AC 220 to 240 V ±10 %, 4.3 A, 50/60 Hz |
AC 100 to 120 V ±10 %, 5.8 A, 50/60 Hz or
AC 220 to 240 V ±10 %, 3.0 A, 50/60 Hz |
| Power consumption |
During operation |
Approx. 1,110 W |
Approx. 780 W |
| Sleep mode |
Approx. 34 W |
Approx. 33 W |
| Acoustic noise level |
During operation |
64 dB (A) or less (according to ISO 7779) |
| During standby |
40 dB (A) or less (according to ISO 7779) |
| Dimensions |
With stand |
2,310 (W) x 740 (D) x 1,125 (H) mm
[90.9 (W) x 29.1 (D) x 44.3 (H) in.] |
1,700 (W) x 740 (D) x 1,125 (H) mm
[66.9 (W) x 29.1 (D) x 44.3 (H) in.] |
| With ink-cartridge tray and stand |
2,310 (W) x 1,000 (D) x 1,125 (H) mm
[90.9 (W) x 39.4 (D) x 44.3 (H) in.] |
1,700 (W) x 1,000 (D) x 1,125 (H) mm
[66.9 (W) x 39.4 (D) x 44.3 (H) in.] |
| Weight (with stand) |
109 kg (240 lb.) |
87.5 kg (193 lb.) |
| Environmental |
Power on |
Temperature: 15 to 32 °C (59 to 90 °F) [20 °C (68
°F) or more recommended],
Humidity: 35 to 80 %RH (non-condensing) |
| Power off |
Temperature: 5 to 40 °C (41 to 104 °F), humidity:
20 to 80 %RH (non-condensing) |
| Included items |
Stand, power cord, ink-cartridge tray, blade,
blade holder, media clamps, media flanges, replacement blade for
separating knife, cleaning kit, software RIP, and user's manual,
etc. |
*1 The length of printing or cutting is subject to the limitations
of the program.
*2 Using Roland specified media, print travel of 1m, temperature: 25
°C (77 °F), humidity: 50 %RH
*3 Not assured when the print heater or dryer is used.
*4 Using Roland specified media, loaded on the shaft, [PREFEED] menu
item must be set to "ENABLE," with 25 mm or more for both right and
left margins and 35 mm or more front margin, excluding expansion or
contraction of the media. VP-540: Media 610 mm wide or over and 4,000
mm long. Media 610 mm wide or less and 8,000 mm long. VP-300: media
3,000 mm long.
*5 Provided that media length is under 3,000 mm. Temperature: 25 °C
(77 °F).
Excluding possible shift caused by expansion / contraction of the
media and / or by reloading the media.
*6 Using Roland specified media, data size: 1,000 mm in the
media-feed direction, 1,346 mm (VP-540) or
736 mm (VP-300) in the carriage-movement direction.
No lamination. Automatic detection of crop marks at 4 points when
media is reloaded.
During cutting, [PREFEED] menu item must be set to "ENABLE."
Temperature: 25 °C (77 °F).
Excludes the effects of slanted movement and of expansion and
contraction of the media.
*7 Warm-up is required after powerup. This may require 5 to 20
minutes, depending on the operating
environment. The preset temperature may fail to be reached depending
on the ambient temperature and
media width.
Roland VersaWorks System Requirements
| Operating system |
Windows®XP
Professional Service Pack 1 or later or Windows®2000
Service Pack 4 or later |
| CPU |
Pentium 4 2.0 GHz or faster
recommended |
| RAM |
1 GB or more recommended |
| Free hard-disk space |
40 GB or more recommended |
. |
|
|
|
|
Craft Robo,
Craft Robo Pro, Graphtec, Roland, Roland Versacamm, Versacamm SP-300v,
VP-300, VP-540
VersacammSP-540v, Print and Cut, Graphtec Plotters, Roland Plotters, Vinyl
Cutting Systems,
Plotters, Sign Making Machines, Vinyl Signs, Flex, Flock, T-Shirt
Printing.
|
|
